WhatsApp +84 988 785 393 mkt2@haiduongmp.com

OEM & Private Label · 19 Nov 2026

OEM Dive Weights: How to Build a Private Label Dive Weight Line

OEM Dive Weights: Private Label Guide – Fides Fishing

Short answer: a private label dive weight line is built from five choices:

  1. the sizes, usually 1 to 5 lb, or kilogram sizes for metric markets;
  2. the finish, bare lead or vinyl-coated;
  3. a color for each size;
  4. where your logo goes, on a label over the coating or on the pack;
  5. the packing, single retail packs or bulk cartons for dive centers.

We cast and vinyl-dip dive weights at our factory in Vietnam, with a minimum of 2,500 pieces that you can split across sizes and colors.

Who builds a dive weight line

  • Dive equipment brands that want weights in their own colors next to their BCDs and belts.
  • Dive retail chains that sell weights under a store brand.
  • Dive centers and training organisations that need large, consistent rental stocks.
Vinyl-dipped lead dive weights in different colors
Vinyl-coated dive weights in a choice of colors.

1. Sizes

Size Weight
1 lb 0.45 kg
2 lb 0.91 kg
3 lb 1.36 kg
4 lb 1.81 kg
5 lb 2.27 kg

Divers add weight in small steps, so a full run from 1 to 5 lb lets every customer fine-tune. For metric markets, kilogram sizes such as 1 kg and 2 kg can be made on request, with the weight shown in the casting. Pocket weights for BCD weight pockets can also be produced.

Lead dive weights of 2 kg with the weight marked in the casting
Kilogram sizes for metric markets.

2. Finish: bare or vinyl-coated

Bare lead is the low-cost choice for rental fleets. Vinyl-coated weights keep lead off hands, avoid grey marks on decks, BCDs and wetsuits, and look new for longer. We vinyl-dip rather than paint, because paint chips easily on dive weights. The full comparison is in our lead dive weights wholesale guide.

3. A color for each size

Color makes sizes quick to identify when a dive center hands out weights before a dive. Brands use their own color schemes, so pick one and keep it across every product and reorder:

  • Choose one color per size, and avoid colors that are hard to tell apart in low light.
  • Print the color key on the pack or on a card for dive centers.
  • Approve the colors on samples before production. The approved samples become the reference for reorders.
  • On the coating: a logo label can be applied on vinyl-coated weights.
  • On the pack: your logo, size, barcode and any warnings on every retail pack.
  • In the color: a brand color is recognisable on its own, on the boat and in the shop.

More on marking options: logo and weight marking.

Single lead dive weight packed in a zip bag
A single weight in a resealable bag, ready for a retail label.

5. Packing

Pack Best for
Single weight in a resealable bag with your label Dive shops and online sales
Bulk cartons, one size per carton Dive centers and rental fleets
Mixed cartons to your plan Distributors supplying several shops

Dive weights are dense, so cartons are packed to a safe handling weight and loaded by weight, not volume. See how many sinkers fit in a 20ft container for how heavy loads are planned.

Bare lead dive belt weights in bulk at the factory
Bare lead belt weights before packing.

Belt fit

Our belt weights thread onto standard weight belts. If your belts use a different webbing width, send us a belt or the slot size, and we will confirm the fit on samples before production.

Order size

The minimum is 2,500 pieces for diving weights, which you can split across sizes, finishes and colors. For example, 500 pieces of each size from 1 to 5 lb is 2,500 pieces and about 7,500 lb of lead. Dive weights can also ship in the same container as fishing sinkers.

Lead dive weights laid out in rows after casting
Every batch is weight-checked before coating and packing.

Ordering from Fides Fishing

  • Belt weights from 1 to 5 lb, kilogram sizes and pocket weights on request.
  • Bare lead, or vinyl-dipped in your colors.
  • Logo label on the coating, and your branding on the pack.
  • Every batch weight-checked before coating and packing.
  • Samples in about 10 days. Production in about 30 days after approval, a little longer for vinyl-dipped weights.

FAQ

Is there a standard color code for dive weight sizes?

Brands use their own schemes. Choose one color per size, print the key on the pack, and keep it the same on every reorder.

Can you make dive weights in kilograms?

Yes, kilogram sizes such as 1 kg and 2 kg can be made on request.

Can you put our logo on the weights?

On vinyl-coated weights, a logo label can be applied on the coating. Your logo also goes on the packaging.

What is the minimum order?

2,500 pieces, which can be split across sizes and colors.

Do you make soft or shot-filled weights?

We make cast lead belt weights and pocket weights.

Fides Fishing casts lead dive weights and vinyl-dips them in your colors for dive shops and private label brands. Request a quote with your sizes, colors and packing.

Talk to our team

Have technical questions about production and compliance?

Connect directly with our team to discuss materials, weights and custom coatings.

  • Reply within 24 hours, Vietnam time
  • OEM and ODM, from samples to mass production
  • Sea freight worldwide with full export documents
Every batch weight-checked Direct factory price NDA on request

Need immediate support? mkt2@haiduongmp.com| +84 988 785 393

Drawings or photos? Send them by email or WhatsApp after this.
WhatsApp E-mail Inquiry